A-A-54287
adaptors, connecting tubing, and valves to produce a complete, stand-alone, bleeding moulage shall be provided.
All components shall be provided with a durable compartmented carrying case which shall be capable of repeated carefree use. The carrying case shall pass a 50 centimeter drop test onto concrete at any angle without damaging the case or any of the contents. Scuff marks are allowed. The case shall not exceed 24” x 14” x 16” in size. The weight, including all the components in the kit, shall not exceed 30 pounds.
All items in this kit shall be (re)useable even after one year storage in the carrying case.
The plastic moulages shall be capable of withstanding storage conditions of 130°F at 95 percent relative humidity and -20°F. They shall withstand washing in mild soap and warm water with soft wash cloths or sponges, and patting dry with soft dry clothes without becoming damaged or degraded.
The simulated blood shall have the capability of being removed from most clothing by prompt good laundering (except woolen clothes which may become permanently stained).
Literature shall be included which provides brief “instructions and a list of kit components with replacement prices.
The moulages shall be identified with name or part number which shall correspond with the literature supplied with the kit. Marking shall withstand many uses and washings.
The kit shall include all the items shown in the following lists in the quantities noted except as follows:
The list with heading “STICK ON MOULAGES - FOAM RUBBER OR EQUIVALENT”, only 12 different moulage types of the 15 types listed are required.
b. The list with heading “STICK ON MOULAGES- PLASTIC”, there shall be at least 48 moulages assorted, no more than 12 or less than 3 selected from the 8 types listed.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business